NEWS
13
2022
-
08
2022-08-13
Change to the conventional screw type; it is recommended to use thin wire for the connected line
Pneumatic butterfly valve is usually a combination of pneumatic actuator and valve body and some accessories after installation and debugging. This article mainly introduces the precautions for on-site use of pneumatic butterfly valves.
13
2022
-
08
2022-08-13
The development of vacuum solenoid valve encounters a bottleneck, and there are challenges in transformation and upgrading
The application field of vacuum solenoid valve products is more and more extensive, but with the development of the industry for many years, the vacuum solenoid valve has gradually exposed many problems, and there has been a development bottleneck. It can be said that enterprises achieve breakthroughs in quality and efficiency, and jointly create a good environment for industry development. The road of enterprise transformation has become an inevitable development and a challenge for current development.
13
2022
-
08
2022-08-13
How to choose solenoid valve products, there are three major factors for purchase
As an industrial automation control instrument, the solenoid valve is more and more widely used with the development of the industry. When many people buy solenoid valves, they do not know how to select and distinguish, which will cause great trouble. Solenoid valve is a highly practical industrial product with great ductility, and there are many product models and technical indicators of solenoid valve. When purchasing, you can look for the following three indicators to obtain solenoid valve products with good performance.
13
2022
-
08
2022-08-13
Precautions for on-site use of pneumatic butterfly valves
Pneumatic butterfly valve is usually a combination of pneumatic actuator, valve body and some accessories after installation and debugging. This article mainly introduces the precautions for on-site use of pneumatic butterfly valves.
13
2022
-
08
2022-08-13
Daily maintenance of steam solenoid valve
After the steam solenoid valve is installed, it is necessary to pass the medium to the test for several times, and it can be put into official use after confirming that it is normal.The dirt on the inside and outside of the large valve and the suction joint surface should be cleaned regularly, and be careful not to damage the sealing surface.
13
2022
-
08
2022-08-13
How to choose the diameter of the electric regulating valve
When the electric control valve is actually used, the control valve is always installed in the process pipeline system, and the pressure difference before and after the electric control valve changes with the resistance of the pipeline system. Therefore, when selecting the flow characteristics of the regulating valve, not only the process characteristics, but also the piping conditions of the system should be considered.
